Copyright © 1995-2019 Michael P. Murray & Mike's Clock Clinic Mike's Clock Clinic Memberships: NAWCC 1600 Maryland Avenue Myrtle Point, OR 97458-1508 Phone: 541-559-1090, or 877-286-6762 (Toll Free)
Please do NOT call or E-mail unless you have read this entire Web pageE-mail address: Mike@revereclocks.com (Preferred contact method)
Telechron "B" Clock Rotors
My business is rebuilding your original rotor. The type "B" is the larger rotor which generally turns at the rate of 1 R.P.M. There are 3 basic types of "B" rotors. The first is a "B-2" rotor and that has the lowest torque and is a 2-watt rotor designed to take a 2-watt coil. The next is the most common and that is the "B-3" rotor and that is the highest torque of the "B" rotors and is a 4-watt rotor designed to take a 4-watt coil. This is the most used rotor and it is in most chiming mantel and grandfather clocks. The last is the "B-13" and it is a 4-watt rotor designed to take a 4-watt coil and was first manufactured in the 1960's and was made as a cheap replacement for both the "B-2" and "B-3" rotors. It was never placed into a clock movement by any manufacturer, so it cannot be an originally installed part. For a list of most 60 cycle rotors please see this link. Most "B" rotors cost $150.00 plus $15.00 priority mail (Canada is $40.00) and have a 2-year warranty, which brings your total cost to $165.00 assuming you send the old rotor at time of payment. The exceptions are the M-1, M-31, & M-38 Rotors. I must have the old rotor or add $75.00. Aluminum rotors will NOT qualify as an exchange for their copper and nickel counterparts. Typically aluminum rotors have a M # of 3300 or higher. The aluminum "B-13" rotor can be rebuilt. The process takes about 4 to 5 days and the cost on the "B-13" is $150.00 plus $15.00 priority mail (Canada is $40.00), which brings your total cost to $165.00. Typically aluminum rotors have a M # of 3300 or higher. The "B-13" aluminum rotor can be ordered without having to send in your old one but it would be nice if you have the time. My having some in stock is why the turn around is a few days assuming you send the $165.00. All rebuilt's from whatever source, will have some noise. Rebuilt's will be significantly quieter but all will carry some noise. The one disadvantage of an aluminum cased rotor is that Telechron used fiber board plates and then coated them (dipped) in phenolic resin whereas the pre-aluminum rotors used copper plates. Three of the seven wheels, in the "B-13" rotor, are also phenolic resin and that material was used to reduce noise of the wheels meshing but actually these plates increased the overall noise of the rotor. Phenolic dipped plates will never last as long as copper and the material was used to reduce overall production costs but should last for years. It is because of these plates that the noise level of any rebuilt aluminum rotor will be greater than the copper plates of original rotors. So I strongly suggest you do NOT use an aluminum rotor for clocks located in your sleeping area. If you want to send in the clock for motor or rotor replacement, please be advised that shipping will jump from $15.00 to $110.00 with everything else staying the same. The increase covers return shipping and insurance and includes my labor charge of $50.00 for the replacement ($260.00 total). There is usually a saw like 2 blade system in the clock to secure the chime rods for shipping. Please be sure that is engaged for safe shipping. If they are gone or not there then I use a piece of small bulb-ed bubble wrap and fold it over once and then weave it in and out of the chime rods. A one inch wide strip is all that is needed. This is easy to remove and prevents the chime rods of rattling during shipping and breaking. If one or more breaks then that adds $50.00 to install a set of tuned rods which has to be done because replacing only one or two rods throws the whole tune out of pitch. B-2 or B-3 or B13-rotor rebuilding $150.00 Labor $50.00 Shipping via UPS ground $60.00 Total $260.00 My turnaround is 3 to 4 weeks for motor/rotor service, 4 to 6 months if the clock is sent with the motor/rotor, or the movement is overhauled and expedited service adds $100.00 for rotor only service and doubles the labor on the movement overhaul. Expedited service take about 2 weeks for motor/rotor service, one month if the clock is sent with motor/rotor, or the movement needs to be overhauled. All aluminum "B-13" rotors are replacement rotors. Meaning that they were manufactured after your clock was made in order to save production costs on replacements. For an extra $75.00, I can replace your aluminum cased "B-13" rotor with an older nickel cased "B-3" rotor. The "B-3" has copper plates and will generally last 2 to 4 times longer then their aluminum counter parts ($240.00 total). B-3-rotor rebuilding $150.00 Taking a "B-3" from inventory $75.00 Return Priority Mail shipping (rotor only) $15.00 Total $240.00 I'll not ship the rotor/motor until I received payment. I ONLY accept money orders, certified checks, or company checks for payment but repeat customers may use personal checks. Normally shipping takes place one week or so after I receive payment and thanks !
I have a quick guide for extraction and installation of the "B" rotor. Click on the Quick guide to the "B"rotor.
For return shipping I use USPS for all shipping. If you want to use another carrier then you will have to arrange everything for shipping, meaning I hand the box to the driver, get a receipt and nothing else.
I would like payment by money order, certified check, personal check, business check, or through Pay Pal or Square, which is the only way I take credit cards. I do prefer a check over Pay Pal or Square because Pay Pal and Square take 3%. I only take credit cards if you are in the USA or Canada. The 3% is added to the total bill if you use a credit card. With Pay Pal you can pay me directly using "friends and family" where you absorb all fees and I'm paid the full amount. There would be nothing added amount to the final fill if you absorb all fees. Here you log on to Pay Pal and send me the full amount of my bill, so there is no E-voice coming from me with this method and you will be charged all Pay Pal fees on top of my final bill. With either Pay Pal or Square, I will send an invoice to your E-mail address. Here you are dealing directly with either service and not me. You do have to be a member of Pay Pal in order to issue a payment but you may use Square without any membership or additional Square fees but the 3% will be added to your total bill as with Pay Pal. With Square, I can also take the credit card information which includes the number, expiration date and the last 3 or 4 #'s of the security code from the back of the card BUT that adds 3.5% to the final bill. I'd prefer to avoid this method but it is an option. All of the added fees are exactly what either service charges me for taking your credit card.
Respectfully, Michael P. Murray Memberships Include: National Association of Watch & Clock Collectors An Internet private E-mailing list called Clocksmiths N.A.W.C.C. National 400-day Clock Chapter # 168 A service from, E-mail address: Mike@revereclocks.com Mike Murray Founder of Clocksmiths A specialist in Atmos and 400-day clock repair. Also, I overhaul most plug in electric clocks. In continuous service since 04/01/1982. Mike's Clock Clinic Memberships: Clocksmiths & NAWCC 1600 Maryland Avenue Myrtle Point, OR 97458-1508 Phone: 541-559-1090, or 877-286-6762 (Toll free) My main Web site is located at http://www.atmosman.com/ Main FTP site is located at http://home.earthlink.net/~atmosman/earthpdf.html Memberships: Clocksmiths; NAWCC N.A.W.C.C. International 400-day Clock Chapter # 168 Published in Chapter 168's "Torsion Times" Published in AWCI's "Horological Times" Formally AWCI's 400-day (Anniversary) clock Bench Course Instructor!
This Web page has been accessed